Stock Replacement - Mike Maier Inc

66-70 Fairlane 500lb Coil Spring – 1″ Lowering

onestopsiteshop — Tue, 20 Jul 2021 18:58:01 +0000

After 50 years your vintage Fairlane front suspension might need some fresh parts. These 500# front coil spring will improve the handling of your vintage Fairlane whether you are cruising down the highway or driving in the mountains. These springs will also lower your car approx. 1″ from its factory ride height, they can be further cut down to lower the car further. Remember, cutting 1″ off the spring will lower the car approximately 2″.

Sold as a Pair.

The post 66-70 Fairlane 500lb Coil Spring – 1″ Lowering appeared first on Mike Maier Inc.

60-65 Falcon Stock Lower Control Arm

onestopsiteshop — Thu, 18 Feb 2021 21:33:42 +0000

If you’re upgrading to our MOD 1 Coilover Kit, but aren’t ready to upgrade to a matching lower control arm, we offer stock replacements for the classic Falcon. A tried and true design, it will bolt directly into your early model Mustang.

Sold in pairs.

The post 60-65 Falcon Stock Lower Control Arm appeared first on Mike Maier Inc.

1964-1973 Mustang Spring Perch

onestopsiteshop — Thu, 29 Oct 2020 23:35:46 +0000

Replace your worn out spring perch and spring perch bushings with a fresh set. Goes along great with a new pair of vintage Mustang upper control arms.

Sold in pairs.

The post 1964-1973 Mustang Spring Perch appeared first on Mike Maier Inc.

1964-1973 Mustang Roller Bearing Spring Perch

onestopsiteshop — Sun, 12 Apr 2020 19:44:30 +0000

Upgrade your spring perches to a smooth roller bearing option. Goes along great with a new pair of vintage Mustang upper control arms.

Sold in pairs.

The post 1964-1973 Mustang Roller Bearing Spring Perch appeared first on Mike Maier Inc.

1964-1973 Mustang Stock Lower Control Arm

onestopsiteshop — Sun, 12 Apr 2020 19:42:07 +0000

If you’re upgrading to our MOD 1 Coilover Kit, but aren’t ready to upgrade to a matching lower control arm, we offer stock replacements for the early Mustang. A tried and true design, it will bolt directly into your early model Mustang.

Sold in pairs.

The post 1964-1973 Mustang Stock Lower Control Arm appeared first on Mike Maier Inc.

64-73 Mustang 500lb Coil Spring

onestopsiteshop — Wed, 08 Apr 2020 20:12:26 +0000

These coils are intended to replace the stock coils. Increasing the spring rate to 500lb/inch provides added stability during hard turns and braking without making the ride quality too harsh. This spring rate has been used as the baseline for performance suspensions for 1964-1973 Mustangs for decades now.

Commonly referred to as 620 coils and/or 500lb coils, these springs have had several names throughout the years. These coils are .625″ wire diameter and the spring rate is 500lbs/inch.

We sell these coils at a free height of 13″. We intend you to trim these to fit your ride height needs. It would be very difficult for us to nail your ride height from our office. For added information on how to set ride heights please check out our video for some good tips.

Sold as a Pair.

The post 64-73 Mustang 500lb Coil Spring appeared first on Mike Maier Inc.