2015-Present Mustang - Mike Maier Inc

2015+ Mustang Anderson Composites Side Skirt

onestopsiteshop — Mon, 13 Apr 2020 18:22:29 +0000

Anderson Composites manufactures these S550 Mustang carbon fiber side skirts using a wet vacuum infusion process which will leave your carbon fiber side skirts looking at its best with a high gloss, wet-look shiny finish. These S550 Mustang carbon fiber side skirts are a direct replacement for OE side skirts on your Ecoboost, GT, or V6 Mustang. These are the same side skirts that have been ran on the MMI S550 Mustang, New Blue

WET Carbon Fiber – This product is manufactured “Wet” using 3K, 2×2 Twill Weave Carbon Fiber and Anderson Composites proprietary vacuum infusion process. The industry calls this process “Wet” because the resin is introduced into the mold as a liquid; this process produces a high gloss, wet-look shiny finish. It is highly recommended to use an automotive clear with UV inhibitors to prolong the life and finish of the product.

NOTE: Lead & delivery times for Anderson Composite products are changing by the day. Please call the shop to place your order.

The post 2015+ Mustang Anderson Composites Side Skirt appeared first on Mike Maier Inc.

2015+ Mustang Anderson Composites GT350 Style Hood

onestopsiteshop — Mon, 13 Apr 2020 18:20:04 +0000

Anderson Composites manufactures this GT350 Hood for your S550 Ford Mustang. This hood will give your S550 Mustang that look that you have been wanting. This hood is made from Anderson Composites proprietary vacuum infusion process. The hood is vented with a big heat extractor in the center with a removable mesh screen. This hood has been featured on the MMI Mustang, New Blue. New Blue’s S550 Mustang GT350 style hood was modified to add Trackspec Motorsports Louvers.

This hood will fit all 2015, 2016, 2017 Ford Mustangs (Ecoboost, V6, GT)

Mounts with OE hardware – Requires normal pre-paint prep; including sanding and primer. Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component.

Requires hood pins for safety reasons, Do not install gas hood shocks, dampers, or struts.

NOTE: Lead & delivery times for Anderson Composite products are changing by the day. Please call the shop to place your order.

The post 2015+ Mustang Anderson Composites GT350 Style Hood appeared first on Mike Maier Inc.

2015+ Mustang Anderson Composites Carbon Fiber Decklid

onestopsiteshop — Mon, 13 Apr 2020 18:19:49 +0000

Anderson Composites manufactures this S550 Mustang carbon fiber decklid with an integrated spoiler. The S550 Mustang Carbon Fiber decklid is manufactured using a wet vacuum infusion process which will leave your carbon fiber decklid looking at its best with a high gloss, wet-look shiny finish. This S550 Mustang carbon fiber decklid is a direct replacement for OE trunk on your Ecoboost, GT, or V6 Mustang. This is the same S550 Mustang trunk that have been ran on the MMI S550 Mustang, New Blue with modifications to install an Aeromotions rear wing.

NOTE: Lead & delivery times for Anderson Composite products are changing by the day. Please call the shop to place your order.

The post 2015+ Mustang Anderson Composites Carbon Fiber Decklid appeared first on Mike Maier Inc.

2015+ Mustang MOD Seat Belt Harness Bar

onestopsiteshop — Mon, 13 Apr 2020 18:11:29 +0000

A S550 Mustang seat belt harness bar is a must for any track or autocross enthusiast. It is a direct bolt in to existing bolt locations in the S550 Mustang. This S550 Mustang harness bar is easily installed with no interior modifications and can easily be removed. After the 2 side bars are installed the cross bar can be easily removed in less than 5 minutes and stored to allow passengers to sit in the backseat. The bar is designed to accept any shoulder harness that has wrap around shoulder belts. The harness bar kit includes bracketry to install aftermarket lap belts. It is constructed from 1.25″ DOM tubing and powdercoated for durability.

Includes:

Harness Bar B Pillar Mounts
Harness Bar center section
Inner lap belt mount (Pair)
Hardware

Fitment: 2015, 2016, 2017 Ford Mustang Coupe (Ecoboost, GT, GT350, V6)

The post 2015+ Mustang MOD Seat Belt Harness Bar appeared first on Mike Maier Inc.

2015+ Mustang Wilwood Aero4 Rear Big Brake Kit (14″ Rotor)

onestopsiteshop — Mon, 13 Apr 2020 18:05:01 +0000

AERO4-MC4 Big Brake Rear Axle Kits replace the factory disc brakes and use the MC4 parking brake assembly as a compliment to front big brake upgrades on late model high performance vehicles. High capacity braking from the AERO4R calipers, BP-10 compound pads, and oversized 14.00″ rotors are matched to the OE master cylinder output, ABS function, and individual vehicle bias requirements. Enhanced brake performance, increased durability, and high-tech style compliment big wheel, tire, and suspension upgrades on customized vehicles and all others with increased brake requirements.

The post 2015+ Mustang Wilwood Aero4 Rear Big Brake Kit (14″ Rotor) appeared first on Mike Maier Inc.

2015+ Mustang Wilwood Aero6 Front Big Brake Kit (14″ Rotor)

onestopsiteshop — Mon, 13 Apr 2020 18:02:15 +0000

AERO6 calipers were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For cars, it’s the biggest of the big providing big brake performance for show and dual purpose street and track vehicles. For trucks and SUV’s, it provides big stopping power for towing, off-road, and enhanced braking with wheel and tire upgrades. Kits listed for specific vehicles are fully compatible with OE master cylinder output and ABS function. Directional staggered vane 14.00” rotors provide maximum cooling for sustained high heat durability.

*Note: Stainless steel brake lines are included

The post 2015+ Mustang Wilwood Aero6 Front Big Brake Kit (14″ Rotor) appeared first on Mike Maier Inc.

2015+ Mustang Wilwood Aero6 Front Big Brake Race Kit

onestopsiteshop — Mon, 13 Apr 2020 17:57:47 +0000

AERO6/QS-ST six piston radial mount calipers are coupled with the high cooling capacity of 15.00” dynamically mounted SV-GT staggered directional vane rotors to provide the ultimate brake package for unrestricted road race competition. Thermlock pistons in the calipers resist fade and extend service life by reducing the heat transfer from the pads, caliper body, fluid, and seals. New design AERO6/QS-ST (Thick Pad) calipers with 20mm thick pads increase endurance with longer pad life. Rotors mount to the hubs with forged aluminum hats and radial mount brackets secure the caliper to the spindle in the OE location without modification. Kits also include high temperature, high friction race compound pads and all premium grade fasteners.

*Note: Stainless steel brake lines are included

The post 2015+ Mustang Wilwood Aero6 Front Big Brake Race Kit appeared first on Mike Maier Inc.

2015+ Mustang JRI Rear Shocks

onestopsiteshop — Mon, 13 Apr 2020 17:55:24 +0000

The collaboration between MMI and JRi goes back to the creation of MMI and the early model Mustang line. We developed all our coilover systems utilizing JRi shock technology. With the S550 Mustang platform we have returned to utilize the JRi shock platform with our proprietary valving to produce a ride that is comfortable on the street while allowing the driver to push the vehicle to its limits.

Features

MMI proprietary valving
Quality made in USA JRi shock
Ease of installation
Improved vehicle performance
Available in single & double adjustable variants
Shortened shock body to facilitate lower ride heights
Sold individually

The post 2015+ Mustang JRI Rear Shocks appeared first on Mike Maier Inc.

2015+ Mustang Hyperco 6″ Rear Springs

onestopsiteshop — Mon, 13 Apr 2020 17:50:06 +0000

2.5″ x 6″ Hyper coil springs. 1300 lb pr inch.

Sold each.

The post 2015+ Mustang Hyperco 6″ Rear Springs appeared first on Mike Maier Inc.

2015+ Mustang MOD Rear Height Adjusters

onestopsiteshop — Mon, 13 Apr 2020 17:48:43 +0000

These little adjusters are awesome, and in more ways than one. By mounting the rear coil and spring perch assembly on a screw jack, this parts allows you to quickly and easily adjust the rear ride height of the car with only a wrench. Plus by employing the use of standard coilover springs you are now free to find the spring rate that is right for you. Swapping a spring is quick and easy, we’ve even done it between laps at the track. It also makes corner balancing the car faster and simpler, ultimately giving you even more control over the feel you want at the racetrack.

This weight jacker kit has been designed to work with either a 2.5″ x 6″ diameter coil spring or a 2.25″ x 5″ or 6″ coil spring depending on spring rates. Installation takes only an hour or so and requires no modification or cutting of your car.

The post 2015+ Mustang MOD Rear Height Adjusters appeared first on Mike Maier Inc.