Body - Mike Maier Inc

2015+ Mustang Anderson Composites Side Skirt

onestopsiteshop — Mon, 13 Apr 2020 18:22:29 +0000

Anderson Composites manufactures these S550 Mustang carbon fiber side skirts using a wet vacuum infusion process which will leave your carbon fiber side skirts looking at its best with a high gloss, wet-look shiny finish. These S550 Mustang carbon fiber side skirts are a direct replacement for OE side skirts on your Ecoboost, GT, or V6 Mustang. These are the same side skirts that have been ran on the MMI S550 Mustang, New Blue

WET Carbon Fiber – This product is manufactured “Wet” using 3K, 2×2 Twill Weave Carbon Fiber and Anderson Composites proprietary vacuum infusion process. The industry calls this process “Wet” because the resin is introduced into the mold as a liquid; this process produces a high gloss, wet-look shiny finish. It is highly recommended to use an automotive clear with UV inhibitors to prolong the life and finish of the product.

NOTE: Lead & delivery times for Anderson Composite products are changing by the day. Please call the shop to place your order.

The post 2015+ Mustang Anderson Composites Side Skirt appeared first on Mike Maier Inc.

2015+ Mustang Anderson Composites GT350 Style Hood

onestopsiteshop — Mon, 13 Apr 2020 18:20:04 +0000

Anderson Composites manufactures this GT350 Hood for your S550 Ford Mustang. This hood will give your S550 Mustang that look that you have been wanting. This hood is made from Anderson Composites proprietary vacuum infusion process. The hood is vented with a big heat extractor in the center with a removable mesh screen. This hood has been featured on the MMI Mustang, New Blue. New Blue’s S550 Mustang GT350 style hood was modified to add Trackspec Motorsports Louvers.

This hood will fit all 2015, 2016, 2017 Ford Mustangs (Ecoboost, V6, GT)

Mounts with OE hardware – Requires normal pre-paint prep; including sanding and primer. Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component.

Requires hood pins for safety reasons, Do not install gas hood shocks, dampers, or struts.

NOTE: Lead & delivery times for Anderson Composite products are changing by the day. Please call the shop to place your order.

The post 2015+ Mustang Anderson Composites GT350 Style Hood appeared first on Mike Maier Inc.

2015+ Mustang Anderson Composites Carbon Fiber Decklid

onestopsiteshop — Mon, 13 Apr 2020 18:19:49 +0000

Anderson Composites manufactures this S550 Mustang carbon fiber decklid with an integrated spoiler. The S550 Mustang Carbon Fiber decklid is manufactured using a wet vacuum infusion process which will leave your carbon fiber decklid looking at its best with a high gloss, wet-look shiny finish. This S550 Mustang carbon fiber decklid is a direct replacement for OE trunk on your Ecoboost, GT, or V6 Mustang. This is the same S550 Mustang trunk that have been ran on the MMI S550 Mustang, New Blue with modifications to install an Aeromotions rear wing.

NOTE: Lead & delivery times for Anderson Composite products are changing by the day. Please call the shop to place your order.

The post 2015+ Mustang Anderson Composites Carbon Fiber Decklid appeared first on Mike Maier Inc.